mining drilling and earth moving equipmentmining drilling and earth moving equipment
Drilling Rigs For Sale Home

Prd Rigs

line

Water well Drilling Rigs - PRD 450 Portable

Water well Drilling Rigs
TECHNICAL SPECIFICATIONS
DEPTH 4½" to 6" dia bore holes to a depth of 150 mtr (500 ft) using 3" drill rod

PRIME MOVER

Deck engine of 15 bhp for hydraulic / from compressor air for pneumatic
WORK METHOD

Rotation with direct circulation, nucleus destruction with bleeding by water, air or foam

MAST Channel structure
  Max Capacity - 10 tons (22000 lbs)
  Height          - 2.4 mtr (8 ft)
  Rod handling - 1.5 mtr(5ft)
PULL UP SPEED

6.5 mtr / min (22 ft / min)

PULL UP FORCE 3000 kg / 6600 lbs
PULL DOWN FORCE 2000 kg (4400 lbs)
PULL DOWN SPEED 9.7 mtr /min (32 ft / min)
HYDRAULIC SYSTEM 140 kg / cm2 ( 2000 psi )
REEVING RATIO 1 : 2
ROTARY HEAD Maximum Torque - 190 kg - mtrs (16650 inch - lbs)
ROTARY HEAD SPEED 0 to 25 rpm
OPTIONAL ATTACHMENT

Economy Model can be used with higher diametre feed cylinder to get more pull up

ADDITIONAL FEATURES The same mast can be mounted on small truck for easy approach of difficult site condition
  This can also be altered to drill horizontal bores upto 300 feet
SUITABLE COMPRESSOR 450 cfm/ 150 psi; 450 cfm / 175 psi; 600 cfm / 200 psi
   
 

Water well Drilling Rigs - PRD 500 Trolley

Water well Drilling Rigs - PRD 500 Trolley
TECHNICAL SPECIFICATIONS
CAPACITY 4½" to 6” dia bore hole up to 150 mtrs (500ft)
  6½” to 8” dia (in steps) bore hole up to 100 mtrs by rotary using mud pump
PRIME MOVER Trolley mounted rig with power source for hydraulics from suitable petrol / diesel deck engine
  of 15 bhp
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water, air or foam
MAST Light duty channel structure
  Max Capacity - 8 tons(17600 lbs)
  Height - 3 mtr(10ft)
  Rod handling Capacity - 1.5 mtr(5 ft)
HYDRAULIC SYSTEM  

Maximum operating pressure - 140 kg/cm2 ( 2000 psi )

PULL UP AND PULL DOWN By means hydraulic cylinder and wire rope, reeving Ratio 1:2
  Max pull up force - 3000kg(6600 lbs)
  Max pull up speed - 6.9 mtr/min (23 ft)
  Max pull down force - 2000 kg ( 4400 lbs)
  Max pull down speed - 9.7 mtr/min ( 32ft )
ROTARY HEAD SPEED Rotary head is powered by one hydraulic motor
  Max torque -190 kg - mtrs (16650 inch - lbs)

Max speed - 0 to 25 rpm
JACKS Three Hydraulic jacks of 80 X 45 X 350 stroke
WATER INJECTION PUMP Triplex reciprocating pump of 35 Ipm / 600 psi powered by Hydraulic motor
SUITABLE COMPRESSOR 450 cfm/150 psi, 540 cfm/180 psi, 600 cfm/ 200 psi
OPTIONAL ATTACHMENT Screw type / centrifugal mud pump driven by diesel / petrol engine or hydraulic motor
SHIPMENT

20 feet container

   
 

Water well Drilling Rigs - PRD Tractor Mounted Rigs

Water well Drilling Rigs - PRD Tractor Mounted Rigs
TECHNICAL SPECIFICATIONS
CAPACITY 4½" to 6½" dia bore holes upto 175 mtrs ( 575 ft )
PRIME MOVER From tractor engine
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water,
  air or foam
MAST Medium duty channel structure
  Max Capacity - 10 tons (22000 lbs)
  Height - 5 mtr ( 16.5 ft )
  Rod handling capacity - 3 mtr (10 ft)
PULL UP AND PULL DOWN By means hydraulic cylinder and wire rope, reeving Ratio 1:2
  Max pull up force - 4500 kg (9900 lbs )
  Max pull up speed -15 mtr/min (49 ft / min )
  Max pull down force - 3000 kg ( 6600 lbs )
  Max pull down speed - 34 mtr/min ( 112 ft / min )
ROTARY HEAD
Rotary head is powered by one hydraulic motor
  Max torque - 150 kg - mtrs (13000 inch - lbs)
  Max speed - 0 to 80 rpm
HYDRAULIC SYSTEM 160 kg / cm2 ( 2250 psi )
JACKS Three Hydraulic jacks of dia 100 Χ dia 63 Χ 610 mm stroke
WATER INJECTION PUMP Triplex reciprocating pump of 50 lpm / 1000 psi powered by Hydraulic motor
BREAK OUT WRENCH To open the drill joints hydraulic break out wrench of 350 mm stroke will be
  provided with rope attached
SUITABLE COMPRESSOR 450/150, 600/200, 650/200 or 540/185
OPTIONAL ATTACHMENT Dual speed rotary head can be supplied with torque 150 kg-mtr / 40 kg-mtr and
  rotation speed changes accordingly. The above can be mounted on LCV and also
  same tractor mounted rig can be supply with pneumatic winch and rotation
  motor rig can be supplied with auxillary winch and single rod changer Hydraulic
  system will have the option of an oil cooler. The rig can also be supplied with
  screw / centrifugal mud pump driven by Deck engine or Hydraulic motor.
   
 

Water well Drilling Rigs - PRD 600

Water well Drilling Rigs - PRD Tractor Mounted Rigs PRD Tractor Mounted Rigs
TECHNICAL SPECIFICATIONS
CAPACITY 4½” to 6" dia bore hole upto 150 mtrs (500 ft) and 8" dia bore hole upto
  75 mtrs (250 ft ) favourable drilling condition using suitable compressor
PRIME MOVER Through PTO Drive from light commercial vehicle engine or seperate deck
  engine
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water, air
  or foam
MAST Medium duty channel structure
  Max Capacity - 12 tons ( 25000 lbs )
  Height - 4.5 mtr (15 ft)
  Rod handling Capacity - 3 mtr ( 10 ft )
PULL UP AND PULL DOWN By means hydraulic cylinder and wire rope, reeving Ratio 1:2
  Max pull up force - 4500 kg (9900 lbs)
  Max pull up speed - 21 mtr/min( 70 ft / min )
  Max pull down force - 2750 kg ( 6050 lbs )
  Max pull down speed - 32 mtr/min ( 105 ft/min )
HYDRAULIC SYSTEM 160 kg / cm2 ( 2250 psi )
ROTARY HEAD
Rotary head is powered by one hydraulic motor
  Max torque - 190kg - mtrs (16650 in - lbs)
  Max speed - 0 to 80 rpm
WATER INJECTION PUMP Triplex reciprocating pump of 36 lpm 450 psi powered by hydraulic motor
JACKS Four Hydraulic jacks of 100 X 63 X 610
OPTIONAL ATTACHMENT Screw / centrifugal type driven by diesel / petrol engine or hydraulic motor

COMPRESSOR

540 / 185 or 650 / 200 compressor mounted as a seperate vehicle
   
 

Water well Drilling Rigs - PRD 650

Water well Drilling Rigs - PRD 650  
TECHNICAL SPECIFICATIONS
CAPACITY 4½" to 6" dia bore holes to a depth of 800 ft (240 mtrs)
PRIME MOVER Truck mounted rig with power from truck engine through truck power take off
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water, air or
  foam
  Box type structure
  Max Capacity - 10 tons ( 22000 lbs )
  Height - 6.9 mtr ( 23 ft )
  Rod handling capacity - 4.5 mtr ( 15 ft )
  Casing handling capacity - 6 mtr ( 20 ft )
PULL UP AND PULL DOWN By means hydraulic cylinder and wire rope, reeving Ratio 1:3
  Max pull up force - 4600 kg ( 10,120 lbs )
  Max pull up speed - 125 ft/min (38mtr/min)
  Max pull down force - 5600 lbs (2600 kg)
  Max pull down speed - 227 ft/min (69 mtr/min)
HYDRAULIC SYSTEM   Max operating pressure - 210 kg / cm2( 3000 psi)
ROTARY HEAD
Rotary head is powered by one hydraulic motor
  Max torque - 19,600 in-lbs (225 kg-mtrs)
  Max speed - 0 to 90 rpm
OPTIONAL ATTACHMENT Hydraulic motor driven or engine driven screw type mud pump
JACKS Four hydrualic jacks of 100 x 63 x 610 mm stroke
WATER INJECTION PUMP Triplex reciprocating pump of 36 lpm 450 psi powered by hydraulic motor
BREAK OUT WRENCH To open the drill joints hydraulic break out wrench of 350 mm stroke will be
  provided with rope attached
SUITABLE COMPRESSOR 650 cfm/ 200 psi
   
 

Water well Drilling Rigs - PRD Double Super

Water well Drilling Rigs - PRD Double Super  
TECHNICAL SPECIFICATIONS
CAPACITY 6" to 8" dia bore holes to a depth of 300 mtr (1000 ft)
PRIME MOVER Truck mounted rig with power from truck engine through transfer gear box
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water,
  air or foam
  Drilling by drag bit (over burden) Roto percussion with DTH hammer
MAST Box type structure
  Max Capacity            - 15 tons ( 33000 lbs )
  Height                    - 8.1 mtr ( 27 ft )
  Rod handling capacity - 6.1 mtr ( 20 ft )
HYDRAULIC OIL COOLER Fin type, Flow capacity 90 GPM Cooler fan drive through hydraulic motor
PULL UP AND PULL DOWN By hydraulic cylinder and wire rope, Reeving Ratio 1:3
 

Max pull up force  - 9200kgs (20240 lbs )

 

Max pull up speed - 37mtr/min ( 122ft /min )

  Max pull down force - 6318kgs (13900 lbs )
  Max pull down speed - 53 mtr/min (175 ft/min)
HYDRAULIC SYSTEM 210 kg /cm2 (3000 psi )
ROTARY HEAD Rotary head is powered by one hydraulic motor
  Max torque - 303 kg - mtrs ( 26,400 in - lbs )
  Max speed - 0 to 130 rpm  
OPTIONAL ATTACHMENT Hydraulic motor driven screw type mud pump
JACKS Four hydraulic jacks of 90 x 56 x 795 box type
WATER INJECTION PUMP Triplex reciprocating pump of 50 lpm 1000 psi powered by hydraulic motor
BREAK OUT WRENCH To open the drill joints hydraulic break out wrench of 350 mm stroke
  will be provided
ROD CHANGER WITH AUXILLARY WINCH Manually operated single pivoted rod changer with 1000 kgs capacity pull up
  winch to carry drill pipes, castings and hammer tools
SUITABLE COMPRESSOR 900 cfm, 200 psi /  1100 cfm, 300 psi
   
 

Water well Drilling Rigs - PRD Speed Star

Water well Drilling Rigs - PRD Speed Star  
TECHNICAL SPECIFICATIONS
CAPACITY 6" to 10" bore holes to a depth of 363 mtr ( 1200ft )
PRIME MOVER Truck mounted rig with power from truck engine through transfer gear box
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water, air
  or foam. Drilling by drag bit (over burdern) Roto percussion with DTH hammer
MAST Box type structure
  Max Capacity            - 18 tons (39600 lbs)
  Height                     - 8.00 mtr ( 27 ft )
  Rod handling capacity – 6.1 mtr ( 20 ft )
HYDRAULIC OIL COOLER 90 GPM fin type cooler fan drive through hydraulic motor
PULL UP AND PULL DOWN By means of hydraulic cylinder and wire rope, Reeving Ratio 1:3
 

Max Pull up force     - 9200 kgs ( 20,240 Ibs )

  Max pull up speed    - 48 mtr/min (158 ft/min)
  Max pull down force - 6318 kgs ( 13900 lbs )
  Max pull down speed - 56 mtr/min (184 ft/min)
HYDRAULIC SYSTEM 210 kg / cm2 ( 3000 psi )
ROTARY HEAD Rotary head is powered by one hydraulic motor
  Max torque              - 26,400 in - lbs (303kg - mtrs)
  Max speed               - 0 to 200 rpm
JACKS Four hydraulic jacks of Box type of 90 x 56 x 795
WATER INJECTION PUMP Triplex reciprocating pump of 50 lpm 1000 psi powered by hydraulic motor
BREAK OUT WRENCH To open the drill joints hydraulic break out wrench of 350 mm stroke
  will be provided
ROD CHANGER Manually operated rod changer to handle 3 rods with 1000 kgs capacity pull up
  winch to carry drill rods, casings and hammer tools
OPTIONAL ATTACHMENTS Welding machine, mud pump, diesel filling pump, skid platform with deck engine
SUITABLE COMPRESSOR 900 cfm, 200 psi / 1100 cfm, 300 psi
   
 

Water well Drilling Rigs - PRD Super Drill 1500

Water well Drilling Rigs - PRD Super Drill 1500  
TECHNICAL SPECIFICATIONS
CAPACITY 6" to 12" dia bore holes to a depth of 454 mtr ( 1500 ft )
PRIME MOVER Truck mounted rig with power from truck engine through transfer gear box or
  through a separate deck engine
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water,
  air or foam
MAST Box type structure
  Max Capacity                  - 20 tons (44000 lbs)
  Max height                     - 8.18 mtr ( 27 ft )
  Rod handling capacity      - 6.1 mtr ( 20 ft )
HYDRAULIC OIL COOLER 90 GPM fin type cooler fan drive through hydraulic motor
PULL UP AND PULL DOWN By means of two hydraulic cylinder and wire rope, Reeving Ratio 1:3
  Max pull up force       - 25,400 lbs (11545 kgs)
  Max pull up speed      - 48 mtr/min (158 ft/min)
  Max pull down force   - 8650 kgs ( 19050 lbs )
  Max pull down speed - 80 mtr/min (264 ft/min)
ROTARY HEAD
Rotary head is powered by two hydraulic motors
  Max torque - 465kg - mtrs (40575 in - lbs)
  Max. speed  - 0 to 150 rpm  
HYDRAULIC SYSTEM 210 kg / cm2 / (3000 psi)
JACKS Four hydraulic jacks of 125 x 70 x 700 mm stroke of box type
WATER INJECTION PUMP Triplex reciprocating pump of 50 lpm 1000 psi powered by hydraulic motor
BREAK OUT WRENCH To open the drill joints hydraulic break out wrench of 350 mm stroke
  will be provided with pulley and rope attached
COROUSEL ROD CHANGER The pivoted corousel rod changer with 6 rods handling capacity with hydraulic
  operated swing cylinder arrangement along with winch of one ton capacity to carry
  drill rods, casings and hammer tools
OPTIONAL ATTACHMENTS Welding machine, mud pump, diesel filling pump, skid platform with deck engine,
  box type jack
SUITABLE COMPRESSOR 1100 cfm, 300 psi/ 1150 cfm, 300 psi/ 900 cfm, 350 psi (Separate Truck)
   
 

Water well Drilling Rigs - PRD Max Drill 2000

Water well Drilling Rigs - PRD Max Drill 2000  
TECHNICAL SPECIFICATIONS
CAPACITY 6" to 12" dia bore holes to a depth of 605 mtr ( 2000 ft )
PRIME MOVER Truck mounted rig with power from truck engine through transfer gear box
  or through a separate deck engine
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water,
  air or foam
  Drilling by drag bit (over burden) Roto percussion with DTH hammer
MAST Box type structure
  Max Capacity              - 30 tons ( 66000 lbs )
  Max height                 - 8.18 mtr ( 27 ft ) or 9 mtr ( 29.7 ft )
  Rod handling capacity   - 6.1 mtr ( 20 ft )
HYDRAULIC OIL COOLER 90 GPM fin type Cooler fan drive through hydraulic motor
PULL UP AND PULL DOWN By means of twin hydraulic cylinders and wire rope, Reeving Ratio 1:3
MAX PULL UP FORCE

Max pull up force     - 18410 kgs( 40,500 lbs )

  Max pull up speed    - 40 mtr/min(132 ft/min)
  Max pull down force - 12635 kgs ( 27800 lbs)
  Max pull down speed - 60 mtr/min (198 ft/min)
HYDRAULIC SYSTEM 225 kg / cm2 / (3200 psi)
ROTARY HEAD Rotary head is powered by two hydraulic motors
  Max torque - 606 kg - mtrs(52800 in - lbs)
  Max speed - 0 to 175 rpm
JACKS Four box type hydraulic jacks of 125 x 70 x 795 mm stroke
WATER INJECTION PUMP Triplex reciprocating pump of 100 lpm 1500 psi powered by hydraulic motor
BREAK OUT WRENCH To open the drill joints break out wrench of 350 mm stroke will be provided
  with rope attached
COROUSEL ROD CHANGER The pivoted corousel rod changer with 6 rods handling capacity, hydraulic
  operated swing cylinder arrangement and which of one ton capacity to carry
  drill rods, casings and hammer tools
OPTIONAL ATTACHMENTS Welding machine, mud pump, diesel filling pump, skid platform with deck
  engine, box type jack automatic rod handling arrangement to handle 50
  numbers of 20ft drill rods with remote control
SUITABLE COMPRESSOR 1100 cfm /350 psi, 1150 cfm / 300 psi, 900 cfm / 350 psi, 1100 cfm / 400 psi
SPECIAL ATTACHMENT Automatic rod handling arrangement to handle 50 numbers of 20 ft drill rods
  with remote control
TWO TRUCK ARRANGEMENT One for rig unit and second to carry the compressor
   
 

Water well Drilling Rigs - PRD OZ Drill

Water well Drilling Rigs - PRD OZ Drill  
TECHNICAL SPECIFICATIONS
CAPACITY 6" to 12" dia bore holes to a depth of 750 mtr (2500 feet)
PRIME MOVER Truck mounted rig with power from truck engine or seperate deck engine
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by air, water, foam by
  drilling by drag bit(over burden), Roto percussion with DTH hammer
MAST Box type structure
 

Max Capacity - 45 tons (100000 lbs)

  Height - 8 mtr ( 27 ft ) or 9 mtr ( 29.7 ft )
  Rod handling capacity - 6.1 mtr (20ft)
HYDRAULIC OIL COOLER 90 GPM fin type cooler fan drive through hydraulic motor
PULL UP AND PULL DOWN By means of Hydrauliccylinder and wire rope Reeving Ratio 1:3
  Max Pull up force      -  20,000 kgs (44,000 lbs)
  Max Pull up speed     -  18 mtr / min (60 ft / min)
  Max Pull down force  - 13500 kg (29700 lbs)   
  Max Pull down speed - 25 mtr/min (32 ft/min)   
HYDRAULIC SYSTEM 225 kg / cm2 / (3200 psi)
ROTARY HEAD Rotary head powered by one hydraulic motor
  Max Torque     -    1030 kgs - mtr (90,000 inch - lbs)
  Max Speed      -    0 to 100 RPM
JACKS Four Hydraulic jacks of box type 125 x 70 x 650 mm stroke
WATER INJECTION PUMP Triplex reciprocating pump of 50 lpm 1000 psi powered by hydraulic motor
BREAK OUT WRENCH To open the drill joints hydraulic break out wrench of 350 mm stroke will be provided with
  rope attached
OPTIONAL ATTACHMENTS Welding machine, Diesel fuelling pump, Skid platform with deck engine, box type jack
  Automatic rod handling arrangement to handle 50 numbers of 20ft drill rods with remote
  control
COROUSEL ROD CHANGER The pivoted corousel rod changer with 6 rods handling capacity, hydraulic operated swing
  cylinder arrangement and which of one ton capacity to carry drill rods, castings and
  hammer tools
SUITABLE COMPRESSOR 1100 cfm, 350 psi / 1100 cfm, 300 psi / 900 cfm, 350 psi
SPECIAL ATTACHMENT Automatic rod handling arrangement to handle 50 numbers of 20ft
  drill rods with remote control
TWO TRUCK ARRANGEMENT One for rig unit and second to carry the compressor
   
 

Water well Drilling Rigs - PRD Autoloader

Water well Drilling Rigs - PRD Autoloader  
TECHNICAL SPECIFICATIONS
CAPACITY 6" to 12" borehole to a depth of 363 mtr ( 1200 ft) with DTH
PRIME MOVER Truck mounted Rig with power from Truck Engine
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding
  By air, water, foam by DTH, rotary using drag bit / rock roller bit in over burden
MAST

Box type structure

  Max Capacity – 20 tons ( 44,000 lbs)
  Height – 8 mtr ( 27 ft )
  Rod handling capacity – 6.1 mtr ( 20 ft )
HYDRAULIC OIL COOLER 90 GPM fin type cooler fan drive through hydraulic motor
PULL UP AND PULL DOWN By means of Hydraulic cylinder and wire rope Reeving Ratio 1:3
  Max Pull up force      - 9200kg (20240 lbs)
  Max Pull up speed     - 48 mtr/min (158 ft/min)
  Max Pull down force  - 6318 kgs (13900 lbs) 
  Max Pull down speed - 390 kg - mtr (34000 in - lbs)   
HYDRAULIC SYSTEM 210 kg / cm2 / (3000 psi)
ROTARY HEAD Rotary head powered by one hydraulic motor
  Max Torque        465 kg-mtr ( 40575 inch - lbs )
  Max Speed          0 to 150 rpm
JACKS Four Hydraulic jacks, front two are box type
WATER INJECTION PUMP Triplex reciprocating pump of 50 lpm 1000 psi powered by hydraulic motor
BREAK OUT WRENCH To open the drill joints hydraulic break out wrench of 350 mm stroke will be provided
ROD HANDLING ARRANGEMENT Remote controlled hydraullic pilot rod handling arrangement directly to and from the rod rack
  fitted on either side of the platform. Rod rack can hold total of 45 nos of 6 mt drill pipes 4 1/2"
  OD which can be raised and lowered with Hydraulic cylinder. X-Y-Z axis movement of the rod is
  done with hydraulic cylinder and motor control. The rod is carried from either rack at one time
  and then moved into position under the rotary head for easy coupling and decoupling. Thus
  reducing burden on labour
OPTIONAL ATTACHMENTS Welding machine, Diesel fueling pump, Skid platform with deck engine, mud pump
COMPRESSOR CAPACITY 800 cfm, 200 psi / 900 cfm, 200 psi / 1000 cfm, 275 cfm, 1100 cfm, 300 psi
   
 

Water well Drilling Rigs - PRD 1500 R

 
TECHNICAL SPECIFICATIONS
RATED CAPACITY Drill Pipe Hole Dia Depth
1.770 mtr ( 2540 ft ) of 5.7” Dia hole using 2.36” Dia drill rod
2.600 mtr (2000 ft ) of 6” to 8” Dia hole using 3” Dia drill rod
3.450 mtr (1480 ft ) of 8” to 10” Dia hole using 31/2” Dia drill rod drill
CASING LOAD MAST 1800 Kgs (3960 lbs ) using double sheave travelling block, dead end at frame  
CONSTRUCTION Tubular Steel, electrically welded
HEIGHT 13 mtrs ( 43 ft ) clearance above ground
GROSS LOAD CAPACITY 31820 Kgs ( 70000 lbs )
HOOK LOAD CAPACITY 18200 Kgs ( 40000 lbs ) with double sheave traveling block
RAISING AND LOWERING 2 Nos Hydraulic cylinder

CROWN BLOCK

5 sheaves plus 1 catline sheave

DRILL HEAD
TYPE Integral with draw-works and pull-down cycles drive through torque
  tube and disc type clutch
OPENING 90 mm or 108 mm

RETRACTION

525 mm

PULL DOWN Through 2 Nos, Hydraulic cylinders
STROKE 762 mm
FORCE 706 Kgs for each 7.03 Kg/cm2 Hydraulic oil pressure
DRAW WORKS Barrel dia length; Single line pull Bare Drum
HOISTING DRUM 178 mm  x 216 mm  6820 Kgs
SAND STEEL 178 mm  x 216 mm  6820 Kgs
CLUTCH 406 mm 2 plate mechanical type (Air clutch optional)
BRAKES 470 mm x 100 mm mechanical high leverage type double equalised
DRIVE By chain
TRANSMISSION SUB DRIVE CASE  
HYDRAULIC Five Speed forward, one speed reverse
  Suitable for mounting automotive gear box and to obtain Hi - pump drive
MUD PUMP Pump - fixed displacement vane type discharge & pressure 80 LPM at
  70.3 Kg/cm2
MODEL Standard                   Optional
STROKE x LINEAR SIZE PRDM - 150                PRDM - 200
  150mm x 140mm         200mm x 150mm
DISCHARGS & PRESSURE 885 lpm at 17.79 kg2 1361 lpm at 17.79 Kg/cm2
DRIVE Chain / "V" Belts
CLUTCH Clow Clutch or 203 mm, 3 plates mechanical
LEVELING JACK 4 Nos, mechanical (optional hydraulic)
LIGHTING From truck battery or dynamo, optional separate lighting generator
CONTROLS Conveniently located
PRIME MOVER Truck mounted version all components driven by same truck engine
  through PTO Skid /trailer mounted version through ALU 400 diesel engine
MOUNTING TATA /Ashok Leyland 4x2 or 4x4 truck chasis or trailer mounted
OPTIONAL AVAILABLE Hydraulic break-out, welding generator, auto pull-down chuck, DTH
  attachment wire lines hoist and higher rotary speed upto 750 RPM for
  core drilling purposes
   
 

Mining Drilling Rigs - PRD Multistar

Mining Drilling Rigs - PRD Multistar
TECHNICAL SPECIFICATIONS
CAPACITY 6" to 12" dia bore up to 610 mtr ( 2000 ft ) by DTH
  8" to 10" dia bore up to 360 mtr ( 1200 ft ) by DTH
  6" to 7" dia bore up to 305 mtr (1000 ft ) by RC
  8" to 12½" dia up to 305 mtr ( 1000 ft ) by Mud Rotary up to 1000 mtr
  ( 3500 ft ) by core drilling
PRIME MOVER Skid / Crawler mounted rig with power from deck engine both for truck and rig unit
WORK METHOD Rotation with direct/reverse circulation, nucleus destruction with bleeding by air,
  water or mud
MAST

Web type structure

  Max Capacity - 30 tons (66000 lbs)
  Max Height - 8mtr (27 ft)
  Rod handling capacity - 6.1 mtr (20ft)
HYDRAULIC OIL COOLER 90 GPM fin type cooler
PULL UP AND PULL DOWN By means of twin hydraulic cylinder (125 x 70 x 2650) and wire rope Reeving Ratio 1:3
  Max Pull up force      -  18410 kgs (40500 lbs)
  Max Pull up speed     -  30 mtr / min
  Max Pull down force  - 12635 kg (27800 lbs)   
  Max Pull down speed - 44 mtr/min
HYDRAULIC SYSTEM 210 kg / cm2 / (3000 psi)
ROTARY HEAD Two speed rotary head is powered by two speed hydraulic motor
  Rotary head can be slide out hydraulically for handling the casing pipe and rod handling
  core drilling two speed rotary head with twin speed motor
DISPLACEMENT
Torque (kg - mtrs)
Torque (in - lbs )
88
7680
176
15360
400
34896
801
69792
HYDRAULIC JACKS Four box type of 125 x 70 x 650 mm stroke
WATER INJECTION PUMP Triplex reciprocating pump of 100 lpm 1000 psi powered by hydraulic motor
BREAK OUT WRENCH To open the drill joints rigid type break out wrench of 350 mm stroke will be provided
  with rope attached
MAIN WINCH Maximum pull up at 1st layer - 10 tons
  Maximum pull up speed at 1st layer - 45 m/min
  Rope diameter - 18mm
WIRELINE WINCH Maximum pull up at 1st layer - 2 tons
  Maximum pull up speed at 1st layer - 75 m/min
  Rope diameter - 6 mm
OPTIONAL ATTACHMENTS Mud pump - Hydraulic motor driven 6” x 8” mud pump for rotary drilling bean type water
  pump for core drilling. Automatic rod handling arrangement to handle 50 numbers of 20 ft
  drill rods with remote control . The rig can be mounted on a self propelled under carriage
FOOT CLAMP Hydraulic operated foot clamp for core drilling application
SWIVEL Mud / water swivel for mud and core drilling
CYCLONE Cyclone attachment for rotary head for RC drilling
SUITABLE COMPRESSOR 1100 cfm, 350 psi (or) 1100 cfm, 300 psi
   
 

Mining Drilling Rigs - Reverse Circulation Drilling

Mining Drilling Rigs - Reverse Circulation Drilling
TECHNICAL SPECIFICATIONS
CAPACITY To drill holes of 6" - 7" capacity by DTH cum reverse rotary method up to 400 mts ( 1320 ft )
PRIME MOVER Truck mounted with power from truck engine or skid mounted with power from deck engine
WORK METHOD Rotation with direct circulation, nucleus destruction with bleeding by water, by
  reverse circulation method with DTH hammer
MAST Box type structure will be provided with feed cylinder (140 x 80 x 2350)
  and wire rope reeving of 1:3 ratio with angle drilling up to 450
  Max Capacity – 15 tons ( 33,000 lbs )
  Height – 8 mtr ( 27 ft )
  Rod handling capacity – 6 mtr ( 20 ft )
PULL UP AND PULL DOWN

By means of Hydraulic cylinder and wire rope Reeving Ratio 1:3

 

Max Pull up force    -  10750 kg ( 3650 lbs )

  Max Pull up speed   - 40 mtr / min ( 132 ft / min )
  Max Pull down force  - 7250 kgs ( 10550 lbs )   
  Max Pull down speed – 60mtr / min ( 198 ft/min )
HYDRAULIC SYSTEM 210 kg/cm2 ( 3000 psi )
ROTARY HEAD Two speed rotary head is powered by two speed hydraulic motor with Swivel attachment for
  mud/water suitable for reverse circulatory and DTH drilling
  Max Torque       -   460 kg mtr (40000 inch - lbs)
  Max Speed        -   0 to 1000 RPM
JACKS 125 x 70 x 795 mm stroke
WATER INJECTION PUMP Triplex reciprocating pump of 100 lpm 1000 psi powered by hydraulic motor. Triplex reciprocating
  pump of 100 lpm 1000 psi
BREAK OUT WRENCH To open the drill joints hydraulic breakout wrench of 350mm stroke will be provided with rope
  attached
SUITABLE COMPRESSOR 1000 cfm 300 psi / 1150 cfm 300 psi or 900 cfm 200 psi
OPTIONAL ATTACHMENTS Manually operated corousal four rod changer to handle four nos drill pipe rods to couple drill head.
  A2 ton winch is provided to handle drill rods and other tools
CYCLONE Will be supplied for reverse circulatory drilling and will be mounted on the rig
   
 

Mining Drilling Rigs - Core Drilling

 
TECHNICAL SPECIFICATION
MODEL
PRD CD - 6
PRD CD - 3
PRD CD - 2
PRIME MOVER
52 HP Diesel Engine or 50 HP
23 HP Diesel Engine
19 HP Diesel Engine
Electric Motor
DRIVE
Universal Joint
Universal Joint
Universal Joint
TRANSMISSION
Sliding Gear
Sliding Gear
Sliding Gear
SPEED
5 Forward, 1 reverse
4 Forward, 1 reverse
5 Forward, 11 reverse
SPEED RANGE SELECTOR
Low High Neutral
Low High Neutral
Low High Neutral
NO OF BIT SPEEDS
8
4
4
HOISTING DRUM
Planetary Reduction Gear
Planetary Reduction Gear
Planetary Reduction Gear
DRUM DIA/LENGTH
241 mm / 140 mm
203 mm / 140 mm
203 mm / 140 mm
DRUM CAPACITY
16 mm / 36 m
12.7 mm / 25 m
12.7 mm / 25 m
BARE DRUM SPEED
18, 38, 70, 117 m/min
22, 47, 87, 146 m/min
22, 47, 87, 146 m/min
HYDRAULIC PUMP
Vane type
Vane type
Vane type
DISPLACEMENT
31.8 litre/min
31.8 litre/min
31.8 litre/min
SWIVEL HEAD TYPE
Twin Cylinder
Twin Cylinder
Twin Cylinder
DRIVE ROD TYPE
Round/Hexagonal
Round/Hexagonal
Round/Hexagonal
I. D
101.6 mm
74.6 mm
A - 2 Type 49 mm
HYD. CYLINDER
I.D
101.6 mm
89 mm
89/76 mm
FEED LENGTH
610 mm
610 mm
508/457 mm
ANGLE RANGE
360
360
360
RETRACTION TYPE
Hydraulic
Hydraulic
Optional
TRAVEL LENGTH
406 mm
406 mm
Optional
CATHAED (OPTIONAL)
Top side Mounted
Top side Mounted
Top side Mounted
SPOOL DIA/LENGTH
20/160
162/194
162/194
BARE SOPPL SPEEDS
125 to 900 rpm
100/640 rpm
115/750 rpm
WIRE LINE
Built in
Built in
--
HOIST (OPTIONAL)
DRUM DIA / LENGTH MM
203/410
203/350
--
DRUM CAPACITY 5MM
900 mtrs
600 mtrs
--
BORE DRUM SPEED
98
98
--
HYD. CHUCK (OPTIONAL)
Self Centering (optional)
Self Centering (optional)
--
   
 

Mining Drilling Rigs - Pole Drilling

Mining Drilling Rigs - Pole Drilling
The PRD HFU is rugged and powerful with its hydraulically driven pump and its 12,000 lbs. Mast, the PRD HFU is sure to get the job done. This two speed unit provides dual functions, break and develop. In low speed the pump will produce 2500 psi at 40 gpm. This is essentially your break pressure. In high speed it produces 500 psi. At 80 gpm, this develops the well allowing for optimal water flow.
TECHNICAL SPECIFICATIONS
CAPACITY 12" to 24" dia bore holes to a depth of 15 mtr ( 50ft)
PRIME MOVER Truck or a separate deck engine
WORK METHOD By direct circulation of air
MAST Heavy duty box structure
  Max Capacity             - 30 tons ( 66000 lbs )
  Height                      - 8 mtr (27ft)
  Rod handling capacity - 4.5 mtr (15 ft)
HYDRAULIC SYSTEM Max. Operating pressure : 160 kg/cm2 (2250 psi)
PULL UP AND PULL DOWN By means of two gear box hydraulic cylinder and chain drive
  Max pull up force       - 5000kg (11000 lbs)
  Max pull up speed      - 23 mtr/min (75 ft/min)
  Max pull down force   - 5000 kg (11000 lbs)
  Max pull down speed - 23 mtr/min (75 ft/min)
ROTARY HEAD
Rotary head is powered by a hydraulic motor
  Max torque - 330 kg-mtrs (30,000 in-lbs)
  Max. speed  - 0 to 60 rpm  
JACKS Four box type heavy duty jacks
SUITABLE COMPRESSOR 1500 cfm/ 150 psi/ 1700 cfm / 200 psi (This capacity shall be achieved by combining two compressors)
   
 

Mining Drilling Rigs - Wagon Drilling

Mining Drilling Rigs - Wagon Drilling
PRD - 125 Wagon Drill designed innovatively and manufactured under strict quality, control is a perfect light weight and heavy duty equipment ideal for carrying out all types of drilling operations by DTH method in mines, quaries and construction projects etc.,
CAPACITY: 4" to 4½" Dia hole up to 40 mtr ( 130 ft ) depth by DTH method
SALIENT FEATURES :
Light weight yet rigid, value engineered construction ensuring easy portability and high drilling performance
Design for rotation winch & self propellant pneumatic piston type air motors to provide maintenance free efficient performance
Effectively braked wheels with adjustable front two stabilizers and hold the unit firmly
Centralised control panel with auto feed arrangement for easy operation
Provision for anchoring of mast and locking arrangement between mast and boom ensure perfect rigidity during drilling
Swivel of mast 25 degree either side and capable of drilling holes from 15 degree in word from vertical upto horizontal position
Rear wheels can be swivelled at 90 degree for toe hole drilling
TECHNICAL DATA

AIR MOTORS: 4 Cylinder PISTON MOTORS directly copuled to sturdy Gr Boxes
FEATURES ROTATION WINCH SELF PROPEL
B.H.P. 1250 pm @ 7kg/cm2 4.0 - 4.5 4.0 - 4.5 4.0 - 4.5
Gr Ratio 1:30 1:46.6 1:98.3
Gr Box WORM Spur Spur Spur cum WORM
Speed 0 - 50 RPM 15 m/ min max Pullup 0 to 1.5 km/ hr

Pull Down / Up Force

-- 0.2200 / -2000 KF
 
Max Torque
115 kg – mtr(10,000 in lbs
--  
DIMENSION AND OTHER DETAILS
FEATURES
DATA
Rotation Unit Traverse 2.34 mtrs
Height Mast raised lowered 3.60 mtrs
  0.90 mtrs
Mast lateral swivel + 25 degree
  -
Width 1.8 mtrs
Min HT of Drilling 0.9 mtrs
Comp Air Req 7 to 10.5 Cum3
Weight 900 kgs
   
 

Contact Details

PRD RIGS INDIA
(Export Unit of Paranthaman Exporters)
351, Sankari road
Tiruchengode - 637209

Tel : + 91 - 4288 256455, 256435
Fax : + 91 - 4288 251645
Email : myrig@prdrigs.com

Visit:http://www.prdrigs.com

Mr. T.T. PARANTHAMAN
Managing Director
Mobile : + 91 - 9843110011
Ms. ARTHI
Marketing Head
Mobile : + 91 - 9786665888