MXL |
| Salient
Features |
|
| System capacity |
Dia 4 ½ and 6 ½ drill up to 500 feet
(150 mtrs)
Dia 8” drill up to 150 mtrs |
| Drill rod handling |
10 feet ( 3mtrs) |
| Drill rod changing |
Single rod - manual |
| Power – intake |
From separate engine of 120 hp. |
| Pump drive |
Through separate gear box with engine
mounted to hold 4 separate pumps |
| Feed cylinder |
Dia 125 |
| Pumps |
38 / 38 gpm (143 lpm)
each for
cylinder and motor |
Operating Pressure
Max – load to be
lifted |
Bar – 150
Load in kgs –
6031 |
| Max – pull up speed |
2.22 feet / sec ( 10 feet @ 4.5 sec) 40
M / Min |
| MAX – pull in speed |
3.33 feet / sec ( 10 feet @ 3 sec) 60 M
/ Min |
| Rotation |
Through specially mode gear box 1:3
reduction |
| Max-rotation torque |
Torque in NM – 2102 |
| Max spindle RPM |
128 RPM |
|
 |
|
| Send Mail |
| |
RXL |
| Salient
Features |
|
| System capacity |
Dia 6½ and 8” drill up to 300
mtrs
Dia 10” drill up to 150 mtrs |
| Drill rod handling |
6.25 mtrs (20 feet) |
| Drill rod changing |
Single rod - manual |
| Power – intake |
From truck engine |
| Pump drive |
Through separate gear box assembled on
line of propeller shaft to hold 4 separate pumps |
| Feed cylinder |
Dia 125 |
| Motors for rotation |
OMV 315 or equivalent |
| Pumps |
45 / 45 gpm (170 lpm)
each for
cylinder and motor |
Operating Pressure
Max – load to be
lifted |
Bar – 175
Load in kgs – 7036 |
| Max – pull up speed |
2.5 feet / sec ( 20 feet @ 8 sec) 45
Mtrs / Min |
| MAX – pull in speed |
4 feet / sec ( 20 feet @ 5 sec) 65 Mtrs
/ Min |
| Rotation |
Through specially mode gear box 1:3
reduction |
| Max-rotation torque |
Bar – 175
Torque in NM –
2364 |
| Max spindle RPM |
162 RPM |
|
 |
|
| Send Mail |
| |
RXL Super |
| Salient
Features |
|
| System capacity |
Dia 6 ½ drill up to 500 mtrs
Dia 8”
drill up to 300 mtrs
Dia 12” drill up to 150 mtrs |
| Drill rod handling |
20 feet |
| Drill rod changing |
Single rod - manual |
| Power – intake |
From truck engine |
| Pump drive |
Through separate gear box assembled on
line of propeller shaft to hold 4 separate pumps |
| Feed cylinder |
Dia 140 |
| Pumps |
45 / 45 gpm (170 lpm)
each for
cylinder and motor |
| Motors for rotation |
OMV 315 / 400 |
Operating Pressure
Max – load to be
lifted |
Bar – 175
Load in kgs – 8800 |
| Max – pull up speed |
2.13 feet / sec ( 20 feet @ 10 sec) 39 M
/ Min |
| MAX – pull in speed |
3 feet / sec ( 20 feet @ 7 sec) 58 M /
Min |
| Rotation |
Through specially mode gear box 1:3
reduction |
| Max-rotation torque |
Bar – 175
Torque in NM – 2364 |
| Max spindle RPM |
162 RPM |
|
 |
|
| Send Mail |
| |
BXL |
| Salient
Features |
|
| System capacity |
Dia 6 ½ drill up to 500 mtrs
Dia 8”
drill up to 300 mtrs
Dia 10” drill up to 150 mtrs |
| Drill rod |
20 feet |
| Drill rod changing |
Remote Operated to faciltate auto fixing
and dismantling |
| Power – intake |
From truck engine |
| Pump drive |
Through separate gear box assembled on
line of propeller shaft to hold 4 separate pumps |
| Feed cylinder |
Dia 140 |
| Pumps |
45 / 45 gpm (170 lpm)
each for
cylinder and motor |
| Motors for rotation |
OMV 315 |
Operating Pressure
Max – load to be
lifted |
Bar – 175
Load in kgs – 8800 |
| Max – pull up speed |
2.13 feet / sec ( 20 feet @ 10 sec) 39
Mtrs / Min |
| MAX – pull in speed |
3 feet / sec ( 20 feet @ 7 sec) 58 Mtrs
/ Min |
| Rotation |
Through specially mode gear box 1:3
reduction |
| Max-rotation torque |
Bar – 175
Torque in NM –
2364 |
| Max spindle RPM |
162 RPM |
|
 |
|
| Send Mail |
| |
Tracking |
| Salient
Features |
|
| System capacity |
Dia 4 ½ drill up to 250 mtrs (820
feet)
Dia 6 ½ drill up to 150 mtrs (490
Teet) |
| Drill rod handling |
10 feet |
| Power – intake |
From tractor engine |
| Pump drive |
Through separate gear box assembled on
PTO shaft to hold 4 separate pumps |
| Feed cylinder |
Dia 100 |
| Pumps |
38-5 / 38-12 gpm (143 / 143 lpm) each
for cylinder and motor |
| Motors for rotation |
OMT 315 |
Operating Pressure
Max – load to be
lifted |
Bar – 150
Load in kgs –
5800 |
| Max – pull up speed |
1.45 feet / sec ( 10 feet @7sec) 31 M /
Min |
| MAX – pull in speed |
1.76 feet / sec ( 20 feet @ 6 sec) 32 M
/ Min |
| Rotation |
Through specially mode gear box 1:3
reduction |
| Max-rotation torque |
Bar – 150
Torque in NM –
2100 |
| Max spindle RPM |
128 RPM |
|
 |
|
| Send Mail |
| |
Crawler |
| Salient
Features |
|
| System capacity |
Dia 4 ½ drill up to 60 mtrs
Dia 6 ½ drill up to 30
mtrs |
| Drill rod handling |
10 feet |
| Power – intake |
From 40 HP diesel engine |
| Pumps |
25 GPM 1 No
12 GPM 1 No |
| Rotation |
Through specially mode gear box
hydraulically operated |
| Winch |
Hydraulically operated chain drive |
| Tracking |
Hydraulically
operated |
|
 |
|
| Send Mail |
| |
