Water Well Drilling Rigs

Truck Mounted Drilling Rigs

DTH DTH cum Rotary Combination

Tractor Mounted Drilling Rigs

Trailer Mounted Drilling Rigs

DTH drilling rig DTHR Drills Tractor Mounted Drill Trailer Mounted Drills

DTHR / ROTARY DRILL RIG Brief Technical Specification

DESCRIPTION MODELS DTHR 300 DTHR450 DTHR 600 Drilling Capacity: Drill hole size Max. Remaining Size (in steps) Max. Depth Drill rod size 10.0” (254mm) 14.0” (335mm) 984 ft (300 mtrs) 4.5” (114 mm) 10.0” (254mm) 14.0” (335mm) 1475 (450 mtrs) 4.5” (114 mm) 10.0” (254mm) 16.0” (406mm) 1965 ft (600 mtrs) 4.5” (114 mm) (Under Favourable Drilling Condition) Mast: Construction Centraliser opening R.H Travel Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) Sturdy Box Type 18.0” (457mm) 23 ft (7 mtrs) Rotary Head: Max. Speed Max. Torque 0 to 120 rpm 434 Kgf 0 to 120 rpm 475 Kgf 0 to 120 rpm 519 Kgf Feed System: Pull Up Force (Max.) Pull Down Force (Max.) Rapid speed (up) 11285 Kgf 5525 Kgf 40 m/min 16085 Kgf 8480 Kgf 30 m/min 21990 Kgf 11215 Kgf 24 m/min Hydraulic System: Max. Operating Pressure Filtration (Nom) Return Tank Capacity 220 bar 10 microns 750 ltrs 240 bar 10 microns 800 ltrs 210 bar 10 microns 800 ltrs Prime Mover: Input Drive Driven by suitable Diesel engine Driven by suitable Diesel engine Driven by suitable Diesel engine Levelling Jacks: Cylinder Stroke 4 No.s Ø 125mm X 610mm 4 No.s Ø 125mm X 610mm 4 No.s Ø 125mm X 610mm (System Consists of Reverse Flow Resricted Valves) Break Out Wrench: Actuation Type Cylinder Stroke Hydraulic 300 mm Hydraulic 300 mm Hydraulic 300 mm Mud Pump: Bore Stroke Max. Flow Max. Pressure Drive 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic 152 mm 200 mm 1361 LPM 20.75 Kg/cm² Hydraulic Options: Oil Cooler Type Water Injection Pump Flow Max. Presssure Type of Drive Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 55 Lpm 42 Kg/Cm² Hycraulic

Compressor/Rod changer/Hoist/Water pump with drive are offered as the per the requirement of the customer technical specifications Getech Industries Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly (In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

DTH DRILL RIGS Technical Specifications

Description Models DTH 1000 DTH 1500 DTH2000 Drilling Capacity: Drill hole size Max. Depth Drill Rod Size 6.0” – 8.0” (152mm – 203mm) 1000ft (305mtrs) 4.5” (114mm) 6.5” – 8.0” (168mm – 203mm) 1500ft (457mtrs) 4.5” (114mm) 6.0” – 10.0” (152mm – 254mm) 2000ft (610mtrs) 4.5” (114mm) (Under favourable drilling conditions) Mast: Construction Centraliser opening Rod/Casing handling Sturdy channel 270 mm 6.0 mtrs. Sturdy channel 270 mm 6.0 mtrs. Sturdy channel 305 mm 6.0 mtrs. Rotary Head: Max. Speed Max. Torque 0 to 100 rpm 245 kgf 0 to 100 rpm 245 kgf 0 to 100 rpm 490 kgf Feed System: Pull up Force Pull down Force Pull up speed 8590 kgf 5890 kgf 42 m/min 14070 kgf 7420 kgf 30 m/min 20940 kgf 10680 kgf 20 m/min Hydraulic System: Pump Reservoir capacity Operating Pressure Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Levelling Jacks: Quantity Bore X Stroke Length 4 Nos. 100mm X 610mm 4 Nos. 125mm X 610mm-2 100mm X 610mm-2 4 Nos. 125mm X 610mm Air Line Lubricator: Type Max. Pressure Venture Type 450 psi Venture Type 450 psi Venture Type 450 psi Options: a) Rod Changer b) Oil cooler Type c) Welding Generator d) Water Injection pump Flow Max. Pressure Manual operated Rod changer Hydraulic Driven Fin type oil to air Hydraulic Driven 36 LPM 425 psi Manual operated Rod Changer & Jib Hoist Hydraulic Driven Fin type oil to air Hydraulic Driven 55 LPM 600 psi

Getech DTHR 600 DTH Cum ROTARY DRILL RIG DTHR – 600

Technical Specifications

DTH Drilling To Hole Diameter: 203 mm (8”inches) and Maximum depth: 600 meters, Rotary Drilling to Hole Diameter: 311 mm (12¼”), Maximum Remaining Diameter: 407 mm (16”) and Maximum Depth: 600 meters. 6 X 4 Carrier Truck Minimum. Load capacity of 25 Tonnes Prime Mover engine capacity: 260HP @ 2200 RPM Mast Overall Length: 9000mm Feed System has Pull Back: 22500Kgf and Pull Down: 11000Kgf Rotary Head Assembly torque upto 600 Kg-m Stabilizer Cylinder bore Dia of 125mm Break out Winch has Cylinder bore Dia: 80mm and Stroke: 300mm. Mud Pump Max Flow of 1685 Liter/min Air Compressor to 1350 Cfm/350 PSI

MINI CRAWLER MOUNTED HYDRAULIC RIGS

GETECH Hydraulically operated multi purpose Mini crawler Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customer’s choice, Hydraulic system powered by Deck engine is operated by fixed displacement pump with proportional valve, which regulates track motors, rotary head speed, feed etc., Centralized control panel located close to the drilling point ensures convenience of operation, Getech Rigs require minimum maintenance and easy to operate.

Technical Data

Description Core Drilling Application KMC - 10 DTH Drilling Application KMC - 10 Capacity: Drill hole Dia.(CORE/DTH) Drill Depth Over Burden Drill Dia. Over Burden Drill Depth NW / NQ 500 Feet. ----- ----- Under Favorabnle drilling conditions 4.5” 500 Feet. 6.5” 150 Feet. Under Favorabnle drilling conditions Hydraulic System: A)Prime Mover B) Feed Pull up Force. Pull Down Force. Pull Down Speed. Pull up Speed C) Rotation Speed Torque Speed. Torque. Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m and 0-410 rpm (High mode) 41 Kgf-m Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m ------------ ------------ Compressor Minimum Suggested ---------------------------- 540 CFM & 185 PSI Under Carriage Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track Water Pump Capacity Suggested min Drive & Mounting 50 LPM @ 35 Kgf/cm² 36 LPM @ 28 Kgf/cm² Hydraulic Hoist: 1 Ton @ 30 meters / minute -----------------------

GETECH Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly. (In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

Getech – 1000 SP Drilling Rig

Maximum Drill hole Diameter – 20” and Maximum depth – 10 ft. And 6” – 12” upto a depth of 1000ft Mast Length – 8800 mm Rotary head speed 0 – 65 R.Pm. Rotary head Torque 0 – 900 Kg-m Feed system pull up – 11,200 Kgs Feed system pull down – 5500 Kgs Engine – 260 HP @ 2200 R.Pm Fitted with mobile Crane Fitted with 1150/300 IR. Compressor

Piling Drilling Rigs

KPR5-42 DTH PILING DRILL RIG Technical Specifications Drill hole of Maximum Diameter: 1066mm (42”) and Maximum Depth: 5 Meters Mast Has Overall Length of 8000 mm Rotary Head of Maximum, Speed: 0-20 Rpm and Maximum Torque: 2400kg-m Feed System has Pull Up capacity: 15000 kgf and Pull Down capacity: 5800 Kgf Prime Mover has engine of 260 ps @ 2100 rpm Stabilizer has Cylinder bore Diameter: 125mm and Stroke: 610 mm Breakout Wrench has cylinder bore Diameter: 100 mm and Stroke: 300mm

General KPR5-42 Model, skid mounted Hydraulically Operated Top drive Drilling Rig, Designed to handle Air Drilling application. This Rig is capable of Drilling in different formations such as Medium to Hard Rock by DTH method upto a depth of 16 ft. Under favorable Drilling Conditions. The following are the detailed specifications Capacity DTH Drilling: Drill hole Diameter - 42 (1066) Inches (mm) Max. Drilling Depth - 16 (5) Feet. (Mt.) Drill rod Diameter - 8 (203) Inches (mm) Drill rod Length _ 6 (2.0) Feet (Mt.) Under favorable Drilling Conditions Mast Sturdy structural Mast of electrically welded construction, main members made out of heavy duty structural steel material reinforced with suitable cross members, So that it is strong enough to withstand the high drilling loads. Mast length - 5000 mm Raising & Lowering - With Hydraulic cylinder Rotary Head travel - 3200 mm Rotary Head Heavy duty Hydraulic Driven Top drive Rotation head having infinitely variable speed (0 to 20 RPM) will be provided. This Unit travels on the Mast and is of sturdy construction to absorb sudden shock loads generally encountered during Drilling Operations. Max. Speed (spindle rpm) - 0 – 20 Rpm Max. Torque - 2400 Kg – m Feed System Feed system is provided with adequate travel for handling drill pipes & Casing pipes upto 6 Mt. long. A suitable hydraulic cylinder actuates the feed and hoist. The feed system has the following capabilities: Feed cylinder size - Ø125 x Ø90 x 3500 mm Pull back/up Capacity - 10000 Kgf Pull down Capacity - 5000 Kgf Pull back/up Speed - 30 Mt/min, Feed Cylinder Qty. - 1 No. The feed system will be incorporated with Hold back arrangement to control and limit weight on bit, rapid and slow feed arrangement to sui9t the variable ground conditions.

Mining Drilling Rigs

The Best Performer

• Rigid
• Energy Efficient
• Easy Manoeuverability
• Operator Friendly
• High Productivity
• Low Maintenance Cost
• Durability
• Prompt Service Support

• Stable drilling capabilities
• Structural designed for extra rigidity
• Base frame in Box-construction Anchoring arrangement ensures
• perfect stability during drilling
• Rear wheel swivel able by 90º to prevent movement during toe hole drilling
• Effectively braked wheels with Hydraulic stabilizer in the front, > holding the unit firmly
• Locking arrangement between mast and boon provides extra rigidity
• Easy maneuverability-both in manual and self propulsion modes
• Centralized sensitive controls with Auto feed arrangement ensure easy operation and reduction of operators fatigue.

• Rotation and winch units provide additional power for faster drilling and rapid withdrawals, longer tool life etc., resulting into better productivity
• Heavy duty steel castings & forgings
• Precision machined components
• Durable alloy bearings supported by sturdy retaining rings
• Heavy duty rotation gear Box with involutes profile Gear tooth, duly corrected to prevent failure
• Rigid out-put shaft with extra bearing support and thicker thread profile
• Specially designed Fluid seal to prevent Air leakage

GETECH Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.

(In view of continuous R&D and Product Improvement programmer all specifications, features etc., are subject to amendments without prior notice)

GETECH can supply Products in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.

(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice.

Name: ITD 10
Mounting Type: Crawler mounted
Type of Drilling: Blast Hole Purpose
Applications: Mines, Quarries

DTH Drilling Capacity:
Max Dia: 6”
Max Depth: 150 feet

Advantages:

• Easy movability with Crawler in uneven Terrains
• Mast Tilting oscillation and swing operation
• Provision for angle Drilling

Rig Specifications

Mast: 4400 mm Pull Up Force: 2200 Kg-f Deck engine: 36HP @ 1500 rpm Suitable Compressor: 540 Cfm @ 185 psi. – IR make

Dimensions: Length: 6800 mm Width: 2200 mm Height: 2000 mm Weight: 4.5 Tons Appx.

Performance

Angle Drilling: Up to 30º Max. Drilling rateL 60 to 75 feet per hour Fuel Consumption: 4 to 6 liters per hour Max Speed: 2 kmph Max. Torque: 120 kgm Max. Rpm: 0 – 8- rpm

Core Drilling Rigs

	Truck Mounted Drilling Rigs   CDR 400M   CDR 600M   CDR 1500M Tractor Mounted Drilling Rigs   TC- 40 Self Propelled Rigs
		CDR 400	CDR 600
		CDR 1500
		TC 40	Self Propelled Rig

• Compressor/Rod changer/Hoist/Water pump with drive are offered as the per the requirement of the customer technical specifications.
• GETECH Industries Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.

GETECH's Hydraulically operated Tractor Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customer’s choice, Hydraulic system powered by Tractor engine is operated by fixed displacement pumps, which regulates, rotary head speed, feed etc., Centralized control board located close to the drilling point ensures convenience of operation, GETECH Rigs require minimum maintenance and easy to operate.