ROTARY CUM DTH RIG |
|
| Drilling Capacity |
: |
165 dia x 300 mtrs by DTH 200 dia x 300 mtrs by Rotary |
| |
|
|
Top Head
|
|
|
Driving System
|
: |
Hydraulic Motor & Gearbox |
| RPM |
: |
0-120 RPM |
| Max. Torque |
: |
600 kg.mt. |
| Feed System |
|
|
| Driving System |
: |
Hydraulic Cylinder & Multiplier |
| Max.Pull down force |
: |
9500 Kg. |
| Max.Pull up force |
: |
13600 kg |
| Water Pump |
: |
Pump Driven by Hydraulic Motor |
| Optional |
|
|
| Mud Pump |
: |
1000 Lpm @ 300 psi Mud Pump Driven by Hydraulic Motor. |
| Welding Generator |
: |
300 Amps driven by Hydraulic Motor |
Draw Works
|
: |
3200 Kg |
| Auxiliary Hoist |
: |
1000 Kg driven by Hydraulic Motor |
|
|
|
| Send Mail |
TRUCK MOUNTED DTH RIG |
|
Capacity
RIG CARRIER
Wheel Base
ROTATION HEAD
Max. Output Torque
FEED
Max. pull up force
Max. Pull down force
Max. Pull up speed
Rope Multiplier
AUXILARY WINCH
Max. Lifting Capacity
Max. Lifting speed
MAST RAISING CYLINDER
Number of Cylinders
Max. Capacity of each Cylinder
HYDRAULIC LEVELLING JACKS
Cylinder Specification
Number of Cylinders
Max. Capacity of each Cylinder
WATER PUMP
Capacity
HYDRAULIC OIL COOLER
Heat Dissipation Capacity
Maximum Flow
Fan Speed
ENGINE
Capacity
Model
|
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
: |
61/2” Dia DTH Holes upto 800' in Hard Formation
ASHOK LEYLAND TUSKER SUPER 1616
4700 mm
341 kg. Mt. @ 100 RPM
8180 kg.
5613 kg.
30 Mt/min
1:3
300 kg
10 Mt/min
1no
12566 kg. @ 160 bar
H175 Dia 100/Dia 63 NCLM 610
4 Nos
12566 kg. @ 160 bar
50 LPM @ 400 PSI (28 bar)
40,000 K.Cal/hr
300 lpm
1500 rpm
Truck Engine through Center Gear Box
160 HP @ 2600 RPM
ASHOK LEYLAND AL 412 |
|
|
|
| Send Mail |
ROTARY CUM DTH RIG - BEC - ARJUNA RD - 1500 |
|
Capacity
RIG CARRIER
Wheel Base
ROTATION HEAD
Max. Output Torque
FEED
Max. pull up force
Max. Pull down force
Max. Pull up speed
1 TON AUXILARY WINCH
Max. Lifting Capacity
Max. Lifting speed
MAST RAISING CYLINDER
Number of Cylinders
Max. Lifting Capacity of each Cylinder
Cylinder Specification
HYDRAULIC LEVELLING JACKS
Number of Cylinders
Max. Capacity of each Cylinder
Cylinder Specification
MUD PUMP
Model
Capacity of Mud Pump
BREAKOUT CYLINDER
Max. Pull back Force
WATER PUMP
Capacity
HYDRAULIC OIL COOLER
Heat Dissipation Capacity
Maximum Flow
Fan Speed
ENGINE
Capacity
Model
|
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
: |
6 1/2” Dia 0TH Holes upto 1500 ‘in Hard Formation 12 1/4' Dia Rotary Holes upto 1500 in soft formation in steps.
ASHOK LEYLAND COMET 4x 4/ TATA
4166mm
748kg. Mt. @ 90RPM
374 kg. Mt. @ 180 RPM
16163kg.
10886 kg.
20 Mt/min
1000Kg.
10 mt/min
2 no.
12566 kg. @ 160 bar
H175 Dia 100/Dia 56 NCCM 800
4 Nos
13744 kg. @ 175 bar
H175 Dia 100/Dia 70 NCLM 610
CBG 150
1025 LPM @ 214 PSI
9428 kg.
100 LPM @ 400 PSI (28 bar)
40,000 K.Cal/hr
300 LPM
1500 rpm
212 HP @ 2100 RPM
kirloskar cummins/Equivalent |
|
|
|
| Send Mail |
BEC - SM - 3 |
|
This is a small mini drill rugged and highly portable and is of Rotary – cum – DTH Drill Which has been designed to drill shallow water wells upto 60 mtrs. It is faster than any other mini drill in the market today.
The BEC SM – 3 Drill is the result of over 30 years of experience. It can be carried easily from place to place manually because of lesser weight and is useful for drilling shot holes
For “seismic survey”. The machine is a modified and refined evolution of traditionally available small drilling rig.
The BEC – SM – 3 drill is a small drill, light weight, easily portable and can drill efficiently. It is with detachable mast, engine, hydraulic tank, buick change couplings, base frame and manually transported by means of tyres. |
| |
|
|
Drilling Capacity
Top Head
Driving System
RPM
Max. Torque
Feed System
Driving System
Max.pull down force
Max.pull up force
Optional
Mud Pump |
:
:
:
:
:
:
:
:
|
127 dia x 60 mrs by DTH and Rotary
Hydraulic Motor & Gear box
0-80 RPM
60 kg.mt.
Hydraulic motor with chain
1000 Kg.
1000 Kg
Centrifugal mud pump driven by separate diesel engine
|
|
|
|
| Send Mail |
BEC-TRACK-100-SELF CONTAINED CRAWLER DRILL |
|
TECHNICAL SPECIFICATIONS
|
| CAPACITY : |
: |
105mm to 114mm dia holes using DTH method. |
| MOUNTING |
: |
Heavy Duty Crawler |
| ROTATION: |
: |
Hydraulic Motor & Spur Gear Box |
| Torque |
: |
110 kg.mtr. |
| RPM |
: |
0 to 60 RPM |
| Max Tramming Speed |
: |
1.4 km/hr |
| Gradeability |
: |
30% |
| Track Oscillation |
: |
Through Twin Hydraulic Cylinders |
| Dust Control |
: |
Hydraulically driven Water Injection system |
| HYDRAULIC SYSTEM |
: |
On Board 300 CFM @ 200 PSI IR Screw Compressor is powered by adequate diesel engine and the drive for hydraulic pump is from the Jack shaft of the air end. |
| Track |
: |
Shoe 13" - Triple grouser;No. of Bottom Rollers 5 x 2 No. of Top Rollers 1 x 2 |
| DIMENSION |
|
|
| Length |
: |
7300mm |
| Width |
: |
2900mm |
| Weight |
: |
9.0 Tons |
| Height |
: |
2.35 mtrs. |
| Rod Changer |
: |
Single Manual Rod Changer |
| Positioning |
: |
Boom Swing (Left/Right): 40/45 deg Boom Lift (Up/Down) : 45/30 deg Guide Swing (Left/Right) : 45/45 deg Guide Dump : 75 deg |
|
|
|
|
| Send Mail |
TRACTOR MOUNTED CORE DRILLING RIG 150 - TM - CD |
|
TECHNICAL SPECIFICATIONS
|
| CAPACITY: |
: |
NW Dia Holes upto 150 mtrs. |
|
: |
|
| ROTATION HEAD: |
|
|
| Max. Output Torque |
: |
70 kg. mtr. @ 300 RPM |
|
: |
35 kg. mtr. @ 600 RPM |
|
|
|
| FEED: |
|
|
| Max. pull up force |
: |
3813 kg. |
| Max. Pull down force |
: |
2829 kg. |
| Max. Pull up speed |
: |
15 Mt / min. |
| Multiplier |
: |
1 : 2 |
|
|
|
| 1 TON AUXILIARY WINCH: |
|
|
| Max. Lifting Capacity |
: |
300 kg. |
| Max. Lifiting speed |
: |
50 mt / min |
|
|
|
| MAST RAISING CYLINDER: |
|
|
| Number of Cylinders |
: |
1 No. |
| Max. Capacity of each cylinder |
: |
11782 kg. |
| Cylinder Specification |
: |
H175 Dia 100 / Dia 50 NCCM 800 |
|
|
|
| HYDRAULIC LEVELLING JACKS: |
|
|
| Number of Cylinders |
: |
4 Nos. |
| Max. Capacity of each Cylinder |
: |
11782 kg. |
| Cylinder Specification |
: |
H175 Dia 100 / Dia 63 NCLM 610 |
|
|
|
| MUD PUMP: |
|
|
| Model |
: |
TSA - 75 |
| Capacity of Mud Pump |
: |
205 LPM @ 20 Bar |
|
|
|
| HYDRAULIC OIL COOLER: |
|
|
| Heat dissipation capacity |
: |
40,000 K.cal / hr |
| Max. Flow |
: |
200 LPM |
| Fan Speed |
: |
1500 RPM |
|
|
|
| POWER: |
|
|
| Capacity |
: |
75 HP @ 2500 RPM |
| Model |
: |
New Holland Tractor Engine |
|
|
|
|
| Send Mail |
6” CRAWLER MOUNTED BLAST HOLE DRILL |
|
|
Drilling CapacIty
Top Head
Driving system
RPM
Max. Torque
Feed System
Driving System
Max.pull down force
Max.pull up force
Track Details
Track shoe width
Track length
Traction Motor
Max.speed
Gradability
|
|
165 dia x 35 mtrs
Hydraulic motor & GearBox.
0 - 100 RPM
600 kg.mt
Hydraulic cylinder & Multiplier
15000 kg
11000 kg
500mm
3120 mm
45 hp Motor on each track
1.6 km/h
30 deg.
|
|
|
|
|
| Send Mail |
4” CRAWLER MOUNTED BLAST HOLE DRILL |
|
|
Drilling Capacity
Top Head
Driving system
RPM
Max. Torque
Feed System
Driving System
Max.pull down force
Max.pull up force
Track Details
Track shoe width
Track length
Traction Motor
Max.speed
Gradability
|
:
:
:
:
:
:
:
:
:
:
:
: |
115 dia x 35 mtrs
Hydraulic motor & Gear Box.
0 - 100 RPM
300 kg.mt
Hydraulic cylinder & Multiplier
7500 kg
5240 kg
330 mm
2160 mm
38 hp Motor on Each Track.
1.6 km/h
30 deg.
|
|
|
|
|
| Send Mail |
WAGON DRILL |
|
|
| Model |
: |
MYT140 |
| Rated Pressure (bar) |
|
140 |
| Rated Rotation Speed (rpm) |
: |
400 |
| Torque |
: |
14 kg.mtr. |
| HP |
: |
8.5 |
| Legs – Propelling Pressure (bar) |
: |
50 |
| Legs – Extension (mm) |
: |
1230/1850/2330 |
| Water Pressure (bar) |
: |
6 – 25 |
| Extension – Height (mm) |
: |
2490/3420/4140 |
| Retraction Height (mm) |
: |
1260/1570/1810 |
| Weight (kgs) |
: |
44/48/52 |
| Drill Rod Size (mm) |
: |
19/22 |
|
|
|
|
| Send Mail |
SKID MOUNTED RIG FOR UNDER GROUND MINES |
|
|
|
| |
|
|
Capacity
Rig Carrier
ROTATION HEAD
Max. Output Torque
Max. Speed
H.P of Motor
Air Motor
Gear Box
FEED
Max. Pull up force
Max. Pull down force
Max. Pull up speed
H.P of Motor
Air Motor
Gear Box
MAST RAISING CYLINDER
Number of Cylinder
Operating System
MECHANICAL LEVELLING JACKS
OPTIONAL:
MAST DUMPING
Number of Cylinder
Mast Swiveling
Water Pump
Capacity |
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
: |
5” Dia DTH Holes upto 60 mts in Hard formation
Skid Mounted Rig for under ground mines
150Kg.mt
60 rpm
8 HP
4 cylinder Radial Piston Air Motor
Spur Reduction Gear Box
1500 kg
1500 kg
10 mt/min
10 HP
4 cylinder Radial Piston Air Motor
Self locking worm & worm wheel reduction gear box,
Chain & tyre
1 No
Pneumatically operated hydraulic pump,
Directional control valve and hydraulic cylinder
4 Nos.
Hydraulically operated dumping arrangement for angle hole drilling upto 20 degrees.
1 No
Manually operated swiveling of 5 degrees on eighter sides of vertical
Hydraulically operated water pump
36 LPM @ 400 psi. |
|
|
|
|
| Send Mail |
BEC-TRACK-800-25 PILE DRILLING RIG |
|
|
| CAPACITY : |
: |
800mm dia pile by Auger Drilling. |
| MOUNTING |
: |
Heavy Duty Crawler |
| ROTATION: |
: |
Bent Axis Hydraualic Motors & Spur Gear Box |
| Torque |
: |
4000 kg.mtr. |
|
|
|
| Speed |
: |
10 to 90 RPM |
|
|
|
| Feed |
|
|
| Pull up |
: |
30 Tons |
| Pull down |
: |
14.7 Tons |
|
|
|
| Main Hoist |
: |
12 Tons |
|
|
|
|
|
|
| Auxiliary Hoist |
: |
6 Tons |
|
|
|
| Power Pack |
: |
Hydraulic Pumps |
| Max Drilling depth |
: |
25 mtrs. |
|
|
|
|
| Send Mail |
CRAWLER MOUNTED PILE DRILLING RIG |
|
|
Drilling Capacity
TOP HEAD
Driving System
RPM
Max. Torque
FEED SYSTEM
Driving System
Max. Pull down force
Max. Pull up force
TRACK DETAILS
Track shoe width
Track length
Track width
Max. Speed
Gradability
DECK ENGINE
Make
Capacity
AUXILIARY HOIST:
Capacity
MAIN HOIST:
Capacity
HYDRAULIC LEVELLING JACKS
Number of Cylinders
Max. Capacity of each cylinder
Cylinder specification
MUD PUMP
Make
Model
Capacity
|
|
254 to 610mm dia holes upto 30 ft.
Hydraulic Motor & Gear Box.
0 – 60 RPM
500 kg.mtr @ 30 RPM
Hydraulic Cylinder & Multiplier
2200 kgs
3800 kgs
260mm
3300mm
2000mm
1.6 km/hr
30 deg.
Ashok Leyland/Equivalent
128 HP @ 2400 RPM
1000 kgs driven by Hydraulic Motorangle hole drilling
4000 kgs driven by Hydraulic Motor.
4 Nos.
11782 kgs
100 dia x 60 dia x NCLM610
Kirloskar
Centrifugal
2000 ltrs/min |
|
|
|
|
| Send Mail |
SKID MOUNTED HORIZONTAL DRILLING RIG ( DTH - HD - 450 - 150) |
|
|
TECHNICAL SPECIFICATIONS |
| CAPACITY : |
: |
450mm dia holes upto 50 mtrs by DTH method in steps. |
| MOUNTING |
: |
Skid - Carry on Truck |
| TOP HEAD |
|
|
|
|
|
| Driving System |
: |
Hydraulic Motor & Gear Box |
|
|
|
| Max. Torque |
|
450 kg.mtr |
| Max. RPM |
: |
0 to 80 RPM |
| FEED SYSTEM |
|
|
|
|
|
| Driving System |
: |
Hydraulic Cylinder with Chain Combination |
|
|
|
|
|
|
| Max. Thrust force |
: |
19000 kgs |
|
|
|
| HYDRAULIC LEVELLING JACKS |
|
|
| Number of Cylinders |
: |
4 Nos. |
| Max. Capacity of each Cylinder |
|
19635 kgs. |
| Cylinder Specification |
|
125 dia x 70 dia x NCLM610 |
| WELDING GENERATOR |
|
|
| Capacity of Welding Gen. Set |
|
400 Amps |
| WATER PUMP |
|
|
| Capacity |
|
50 LPM @ 400 PSI |
| HYDRAULIC OIL COOLER |
|
|
| Heat dissipation capacity |
|
50,000 K.cal / hr |
| Max. Flow |
|
400 LPM |
| DECK ENGINE |
|
|
| Make |
|
Cummins/Equivalent |
| Capacity |
|
260 HP @ 2600 RPM |
|
|
|
|
|
| Send Mail |
